Liobate TFLN Applications
We provide TFLN-based photonic applications spanning data center interconnects, coherent optical communication, test instruments, and autonomous driving — delivering next-generation optical communication systems with high bandwidth, low insertion loss, and energy efficiency.
-
Data Center
Data Center1TFLN modulator chips support multi-channel, low insertion loss, high bandwidth, and low power consumption — enabling single CW laser-driven 800G optical transceiver, 1.6T optical transceiver, and 3.2T optical transceiver modules, as well as CPO solutions for AI and cloud data centers. -
Communication Network
Liobate's electro-optic intensity modulator chips deliver low insertion loss and ultra-high bandwidth, supporting coherent optical systems for 400G and 800G telecom optical transceivers. Ideal for mid- to long-reach DWDM optical networks and direct intensity modulation applications in optical communication systems. -
Test Instruments
Liobate fiber optic modulator chips offer 67GHz+ bandwidth, supporting OEO conversion, polarization measurement and control, and frequency identification. Widely used in device and system-level test solutions for coherent optical communication and optical communication systems validation. -
Autopilot
Liobate TFLN modulator chips provide high accuracy, low power consumption, and exceptional reliability for FMCW LiDAR and other photonic applications in autonomous driving — enabling precise optical sensing with the performance demanded by next-generation intelligent transportation systems.
FAQ
1.How does a lithium niobate Mach-Zehnder modulator differ from traditional modulators?
A lithium niobate Mach-Zehnder modulator offers significantly higher electro-optic bandwidth, lower drive voltage, and lower insertion loss compared to silicon or indium phosphide-based modulators. Liobate's TFLN-based Mach-Zehnder intensity modulator achieves 67GHz+ bandwidth, enabling ultra-high-speed signal modulation for next-generation optical communication systems.
2. What is the difference between 800G, 1.6T, and 3.2T optical transceivers?
These refer to the data transmission capacity per optical transceiver module. An 800G optical transceiver supports 800 Gbps, while a 1.6T optical transceiver doubles that capacity, and a 3.2T optical transceiver targets future AI and hyperscale data center demands. Liobate's TFLN modulator chips enable single CW laser-driven solutions across all three generations with high efficiency and low power consumption.
3. What are the advantages of TFLN-based fiber optic modulators in coherent optical systems?
Liobate's fiber optic modulator chips deliver ultra-low insertion loss, high electro-optic bandwidth, and excellent linearity — critical performance parameters for coherent optical systems. These advantages enable longer transmission distances and higher spectral efficiency in DWDM optical networks compared to conventional modulator technologies.
4. Can Liobate TFLN chips be used in DWDM optical networks?
Yes. Liobate's electro-optic intensity modulator and coherent modulator chips are well-suited for DWDM optical networks, supporting 400G and 800G channel rates with low noise and high wavelength selectivity. They are compatible with mid- to long-reach optical communication systems in both metro and long-haul network deployments.
5. What is direct intensity modulation and when is it preferred over coherent modulation?
Direct intensity modulation encodes data by varying the optical power output directly, offering a simpler and lower-cost solution compared to coherent optical communication. It is typically preferred for shorter-reach applications such as data center intra-connections and access networks, where cost efficiency is prioritized over maximum spectral efficiency.
